Latest 300-425 Test Sample - Associate 300-425 Level Exam

P.S. Free & New 300-425 dumps are available on Google Drive shared by Lead2PassExam: https://drive.google.com/open?id=1bDmlbc1cWrbR-Ba8GmbD4D_RDlBCclz6

As the old saying tells that, he who doesn't go advance will lose his ground. So you will have a positive outlook on life. All in all, abandon all illusions and face up to reality bravely. Our 300-425 practice exam will be your best assistant to get the 300-425 Certification. And our 300-425 study materials are always considered the guarantee to pass the exam. You are the best and unique in the world. Just be confident to face new challenge!

Cisco 300-425, also known as Designing Cisco Enterprise Wireless Networks, is a certification exam that focuses on designing enterprise wireless networks using Cisco technologies and solutions. 300-425 Exam is designed for network engineers and IT professionals who want to validate their knowledge and skills in planning, designing, and deploying wireless networks in an enterprise environment.

>> Latest 300-425 Test Sample <<

Marvelous Latest 300-425 Test Sample – Pass 300-425 First Attempt

According to the statistics shown in the feedback chart, the general pass rate for latest 300-425 test prep is 98%, which is far beyond that of others in this field. In recent years, our 300-425 exam guide has been well received and have reached 99% pass rate with all our dedication. As one of the most authoritative question bank in the world, our study materials make assurance for your passing the 300-425 Exam.

Cisco Designing Cisco Enterprise Wireless Networks Sample Questions (Q145-Q150):

NEW QUESTION # 145
During a post-deployment site Survey, issues are found with non wi-Fi interference. What should the engineer use to identify the source of the Interference?

A. Wireless intrusion prevention
B. Wireshark
C. Network analysis module
D. Cisco spectrum expert

Answer: D

NEW QUESTION # 146
A customer has two Cisco 550B WLCs that manage all the access points in their network and provide N+1 redundancy and load balancing. The primary Cisco WLC has 60 licenses and the secondary Cisco WLC has
40. The customer wants to convert the N+1 model to an HA model and provide SSO. Configuration must be performed during a maintenance window. After performing all the configurations on both controllers, the config redundancy unit secondary command is issued on the secondary Cisco WLC and it fails. Which parameter needs to be in place to complete the configuration?

A. A cable in the RP port
B. The primary Cisco WLC is already set as the secondary unit.
C. The secondary Cisco WLC needs a minimum of 50 base licenses
D. SSO needs to be enabled

Answer: C

Explanation:

NEW QUESTION # 147
A customer deploys a new Cisco high-density wireless network within the open areas of a mall to provide free public wireless on 5 GHz. The existing mall tenants have their own wireless networks that are independently managed. Which design approach minimizes channel utilization for the public network?

A. Enable UNII-1 channels only and use 20-MHz channels.
B. Enable all 5-GHz channels that are supported by the region and use 20-MHz channels.
C. Enable UNII-1 channels only and use 80-MHz channels.
D. Enable all 5-GHz channels that are supported by the region and use 40-MHz channels.

Answer: A

Explanation:
To minimize channel utilization and interference with existing tenant networks, it's best to use the UNII-1 channels, which are typically less congested, and stick to 20-MHz channels to provide more non-overlapping channels and reduce co-channel interference.

NEW QUESTION # 148
A rapidly expanding company has tasked their network engineer with wirelessly connecting a new cubicle area with Cisco workgroup bridges until the wired network is complete. Each of 42 new users has a computer and VoIP phone. How many APs for workgroup bridging must be ordered to keep cost at a minimum while connecting all devices?

A. 0
B. 1
C. 2
D. 3

Answer: B

Explanation:
Explanation

So, each AP will have 25 clients. Minimum 4 APs are sufficient.

NEW QUESTION # 149
An AP is receiving 802.11 packets on its 802.11a radio with an RSSI value of -77 dBm. The current AP is part of an AP group that has been assigned an RF profile with RX-SOP set to Medium for 802.11 a. Which action does the AP take with the packets?

A. All frames are classified as non-Wi-Fi frames and are not decoded by the 5 GHz radio.
B. All frames are classified as non-Wi-Fi frames and are not decoded by the 2.4 GHz radio.
C. Frames are decoded by the 2.4 GHz radio.
D. Frames are decoded by the 5 GHz radio.

Answer: D

NEW QUESTION # 150
......

The candidates taking the Designing Cisco Enterprise Wireless Networks exam can try a free demo and test features of Cisco 300-425 exam questions before purchasing it. Lead2PassExam also provides three months of free updates on Cisco exam questions if the exam content changes after you have bought the product. The Lead2PassExam gets feedback from learned professionals and makes improvements in the 300-425 valid questions so that it can serve the purpose well.So, are you ready to earn a Designing Cisco Enterprise Wireless Networks, and join a group of certified and skilled professionals? If yes, getting the Cisco 300-425 exam questions by Lead2PassExam is a perfect start to your Designing Cisco Enterprise Wireless Networks exam preparation.

Associate 300-425 Level Exam: https://www.lead2passexam.com/Cisco/valid-300-425-exam-dumps.html

DOWNLOAD the newest Lead2PassExam 300-425 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1bDmlbc1cWrbR-Ba8GmbD4D_RDlBCclz6